How to Make My Computer See My Usb as a Storage Device and Not a Disc Again Solutions

USB devices like Hard Drives, Pen drives, and Retentivity Card, etc. are the easy fashion to store and transfer data from i calculator to another. These USB drives are portable and easy to handle, merely sometimes you might face the Hard deejay not detected a problem with Windows PC. This happen when the USB port did not recognize the external USB drives. When you try to access the data from the hard bulldoze or USB device, you run into the post-obit USB Device Not Recognized mistake bulletin:

"One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize information technology for assist in solving this problem, click this message."

इस पोस्ट को हिंदी में पढ़ने के लिए यहां क्लिक करें।

Table of Content

• • How to gear up External Difficult Deejay not Detected in Windows?
    • • • • Disconnect the power supply
          • Disconnect USB Device
          • Update USB device drivers
          • Change Drive Alphabetic character
          • Fix USB Root Hub
          • Modify USB Selective Suspend Settings
  • Contact Data Recovery Service Provider
  • Unlike situations of  Hard Deejay have not detected errors

How to gear up External Hard Disk not Detected in Windows?

Disconnect the power supply

Sometimes, a very simple play a joke on can fix an external hard deejay non detecting a problem. Follow the beneath steps to apply this play tricks.

• Close Downwards your computer
• Disconnect the ability cable from your computer and look for a few minutes
• Reconnect the ability cable and Kickoff your reckoner.

Disconnect USB Device

• Disconnect the USB devices from your computer
• Restart your estimator
• Reconnect USB devices to your reckoner

[NOTE]: If the current USB port doesn't observe the hard bulldoze so, try to connect it with another USB port. If it is recognized by other USB ports and so, in that location could be a hardware problem with i of the USB ports. If no USB port recognizes the device so, try another solution. Don't use whatever USB hub to connect the device to the reckoner.

Update USB Device Drivers

If all USB ports are working fine then y'all need to bank check for the latest USB driver installed on the computer. Considering sometimes old drivers tin prevent the drive to connect to the PC and shows the difficult disk non detected an error. To cheque driver status follow the below steps.

• Press Windows + R key together and then, type devmgmt.msc in the run dialogue box and click on OK.
• Aggrandize disk drivers and right-click on the connected external USB drive.
• Click on backdrop and select the Driver tab.
• Click on Update Driver Software and follow the further instruction to update the driver.

[NOTE]: if this method doesn't work, then download and install the updated USB drivers from the estimator manufacturer'due south website. This is useful in case if you lot are trying to install a driver for a printer, scanner, and other input/output USB device.

Change Drive Letter

Bank check whether yous can see your external USB Drive in Disk Direction, and so rename or change the drive letter. To do this follow the below steps.

1. Right-click on This PC or My Computer and click on Manage.

2. Select Disk Management.

3. Right-click on the connected external bulldoze and choose Change Drive Letter and Paths.

4. Click Add, and so assign a new drive letter from the drop-down list and click OK.

Gear up USB Root Hub

• Press Windows + R key together and and then type devmgmt.msc and click on OK.
• Expand Universal Serial Bus controllers.
• Right-click on USB Root Hub and click Properties.
• Select Power Direction and uncheck the Allow the computer to turn off this device to save the power checkbox. Click ok and save changes.

[Notation]: Repeat this process for all available USB Root Hubs. Save changes for each process and then restart your PC. If nevertheless y'all see a USB device non recognized trouble then go back to the power management tab for each one and check the box once more.

Change USB Selective Append Settings

1. Go to Control Panel and click on Hardware and Sound.

2. Click on Ability Options.

3. Select Change Plan Settings under preferred plans. Balanced (recommended).

4. Click on Change advanced power settings.

v. Expand USB settings and USB selective suspend settings.

6. Select Disable from the drop-down menu.

seven. Click "Apply" and "OK" to salve the settings.

[NOTE]: If you employ the laptop, then yous'll see ii options: On Battery and Plugged in. And then, select disable for both settings respectively.

Contact Data Recovery Service Provider

If all the above-mentioned solutions don't set the external hard drive not discover the trouble. And you are still getting the same fault; then there are high chances that your hard bulldoze has go dead. In this state of affairs, you need to have the aid of a Professional Hard Drive Recovery service provider.

If your problem is resolved, then it is brash that you lot should take a backup of your hard drive information; to avoid whatsoever data loss in the future.

Different situations of  Difficult Deejay have non detected errors

Difficult drive not detected fault/issue can be acquired by the post-obit situations:

• • The USB driver has go unstable, outdated, or corrupt
  • USB ports become faulty, damaged, or broken
  • Partition bug on your external USB device
  • The USB device is malfunctioned or damaged
  • The incorrect file system in an external drive
  • Virus-infected PC

If the problem notwithstanding persists after implementing the in a higher place steps then possibility that your hard bulldoze is severely corrupted or damaged. In that case, you can approach a reliable data recovery service provider.

burchellgresto.blogspot.com

Source: https://www.stellarinfo.co.in/blog/how-to-fix-external-hard-disk-drive-not-recognized/

Share this post